[PATCH 1/2] Added functionality to remove modem from system, if needed.

[Ryan Raasch]

Marcel Holtmann wrote:
> Hi Ryan,
> 
>> ---
>>  test/enable-modem |    6 +++++-
>>  1 files changed, 5 insertions(+), 1 deletions(-)
>>
>> diff --git a/test/enable-modem b/test/enable-modem
>> index 0f9f604..d44783d 100755
>> --- a/test/enable-modem
>> +++ b/test/enable-modem
>> @@ -1,6 +1,7 @@
>>  #!/usr/bin/python
>>  
>>  import dbus
>> +import sys
>>  
>>  bus = dbus.SystemBus()
>>  
>> @@ -14,4 +15,7 @@ path = properties["Modems"][0]
>>  modem = dbus.Interface(bus.get_object('org.ofono', path),
>>  						'org.ofono.Modem')
>>  
>> -modem.SetProperty("Powered", dbus.Boolean(1))
>> +if len(sys.argv) > 1 and sys.argv[1] == '0' :
>> +    modem.SetProperty("Powered", dbus.Boolean(0))
>> +else :
>> +    modem.SetProperty("Powered", dbus.Boolean(1))
> 
> if you want this, then add a disable-modem script.

Ok. If no one else thinks it may be needed, i won't. In my case, i 
thought it would be helpful to see what happens to the system to remove 
a modem out of the system, ie. power off. I would be nice to be able to 
set a toggle power to the modem, and allow the daemon to be in the 
correct state to recover.

I have tried toggling the power to the modem (has a switch on the board) 
when the daemon was running, and the daemon was not able to return to a 
known state.

Greetings,
Ryan

> 
> Regards
> 
> Marcel
> 
> 
> _______________________________________________
> ofono mailing list
> ofono at ofono.org
> http://lists.ofono.org/listinfo/ofono