From 660a99d9221940b8cc2b76d1d881cb57318f5253 Mon Sep 17 00:00:00 2001
From: Yang Gu <yang.gu@intel.com>
Date: Fri, 11 Sep 2009 15:25:04 +0800
Subject: [PATCH] Make CPOL and CPLS work

---
 data/moblin.xml |   33 +++++++++++++++++++++++++++++----
 1 files changed, 29 insertions(+), 4 deletions(-)

diff --git a/data/moblin.xml b/data/moblin.xml
index 5409aed..f0f483d 100644
--- a/data/moblin.xml
+++ b/data/moblin.xml
@@ -87,6 +87,9 @@
     <!-- Mobile phone operator selection format (0=long alphanumeric, 1=short alphanumeric, 2=numeric -->
     <set name="OPFORMAT" value="0"/>
 
+    <!-- Preferred PLMN list -->
+    <set name="PLMNLIST" value="0"/>
+	
     <!-- GCF Operator List, format <status(1:available,2:current,3:forbidden)>,"<alphanum.operator name>","<short operator name>","<MCC/MNC num>"-->
     <set name="OP1" value="T-Moblin"/>
     <set name="OP1PLMN" value="23401"/>
@@ -133,8 +136,10 @@
     <set name="OP11STATE" value="1"/>
 
     <!-- Preferred Operators -->
-    <set name="PO1" value="1,2,23401"/>
-    <set name="PO2" value="2,2,23402"/>
+    <set name="PO1" value="1,2,&quot;23401&quot;"/>
+    <set name="PO2" value="2,2,&quot;23402&quot;"/>
+    <set name="PO3" value="3,2,&quot;23403&quot;"/>
+    <set name="PO4" value="4,2,&quot;23402&quot;"/>
 
     <!-- Name of current mobile phone operator -->
     <set name="OP" value="${OP1}"/>
@@ -851,13 +856,33 @@
 <chat>
   <!-- Request selection of preferred PLMN list -->
   <command>AT+CPLS?</command>
-  <response delay="1000">+CPLS: 0\n\nOK</response> -->
+  <response delay="1000">+CPLS: ${PLMNLIST}\nOK</response>
+</chat>
+
+<chat>
+    <!-- Query all supported preferred PLMN list -->
+    <command>AT+CPLS=?</command>
+    <response>+CPLS: (0-2)\n\nOK</response>
+</chat>
+
+<chat>
+    <!-- Set preferred PLMN list -->
+    <command>AT+CPLS=*</command>
+    <response>OK</response>
+    <set name="PLMNLIST" value="*"/>
 </chat>
 
 <chat>
   <!-- Request preferred operators -->
   <command>AT+CPOL?</command>
-  <response delay="2000">+CPOL: ${PO1}\n+CPOL: ${PO2}\n\nOK</response>
+  <response delay="2000">+CPOL: ${PO1}\n+CPOL: ${PO2}\n+CPOL: ${PO3}\n+CPOL: ${PO4}\n\nOK</response>
+</chat>
+
+<chat>
+  <!-- Set preferred operator format -->
+  <command>AT+CPOL=,*</command>
+  <response>OK</response>
+  <set name="OPFORMAT" value="${*}"/>
 </chat>
 
 <chat>
-- 
1.6.0.6