[PATCH_v4 0/5] Private network request to ConnMan
by Guillaume Zajac
Hi,
Changelog from v3 is:
- Add private-network source/include
- ConnMan plugin is independant from emulator
- Each application that need VPN will pass a callback as argument
when private network is requested. This callback will contain the
private network settings.
Guillaume Zajac (5):
gatppp: Add new contructor to use external fd
private-network: add callback typedef drivers and settings
private-network: add request/release functions and new feature to
Makefile.am
emulator: add request/release private network calls
connman: add plugin in oFono to request request/release private
network
Makefile.am | 10 +-
gatchat/gatppp.c | 33 +++++-
gatchat/gatppp.h | 1 +
gatchat/ppp.h | 2 +-
gatchat/ppp_net.c | 40 ++++---
include/private-network.h | 59 +++++++++
plugins/connman.c | 297 +++++++++++++++++++++++++++++++++++++++++++++
src/emulator.c | 49 ++++++--
src/ofono.h | 6 +
src/private-network.c | 89 ++++++++++++++
10 files changed, 556 insertions(+), 30 deletions(-)
create mode 100644 include/private-network.h
create mode 100644 plugins/connman.c
create mode 100644 src/private-network.c
3 months, 1 week
ofono with sim5320 module
by David Ashley
Hello, I'm at my wits' end trying to get ofono working with the
sim5320 module. I'm using the plugins/sim900.c module as a starting
point. I think the issue has something to do with the difference
between the MUX functionality between the 900 and the 5320. The sim900
supports the elaborate parameters sent on the
AT+CMUX=0,x,x,x,x, etc.
but the SIM5320 only supports
AT+CMUX=0
There's that... but also the way the sim900 plugin creates a
SETUP_DLC, initiates muxing, then deletes the setup DLC and creates 4
new DLC's... it didn't work for the sim5320 until I remapped the DLC's
somewhat like this:
#define NUM_DLC 4
#define VOICE_DLC 2
#define NETREG_DLC 1
//#define SMS_DLC 2
#define GPRS_DLC 3
#define SETUP_DLC 0
static char *dlc_prefixes[NUM_DLC] = {
[VOICE_DLC]="Voice: ",
[NETREG_DLC]="Net: ",
// [SMS_DLC]= "SMS: ",
[GPRS_DLC]= "GPRS: " ,
[SETUP_DLC]= "Setup: ",
};
Note I have to eliminate the SMS_DLC usage later in sim5320_post_sim:
// ofono_sms_create(modem, OFONO_VENDOR_SIMCOM, "atmodem",
// data->dlcs[SMS_DLC]);
OK everything is *ALMOST* working. ofonod interacts fine with
connmand, connmand tells ofonod to activate the sim5320, which
actually establishes a ppp connection and sets up a ppp device:
ppp0 Link encap:UNSPEC HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-0
inet addr:30.97.132.47 P-t-P:30.97.132.47 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:2 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:0 (0.0 B) TX bytes:124 (124.0 B)
Here's the rub: No matter what I do, I never get any RX packets from
that ppp device, and even when it appears to TX packets (I'm trying to
ping out) the machine on the internet isn't actually receiving them.
I'm running on a beaglebone with a custom board with a sim5320 module on it.
I have no idea what to try... Any advice would be appreciated...
Thanks very much!!!!
-Dave
3 years, 10 months
IPV6 question
by Enrico Sau
Hi all,
As far as I understand, ofono doen't support IPV6 over ppp due to the fact
that IPV6 compression protocol implementation is missing.
Is that right?
Thank you,
Enrico
5 years
[PATCH 0/2] Detect huawei E3372
by Frédéric Dalleau
I have these two patches after spending some time with E3372 (reflashed with
a so called 21 firmware). I have mixed feeling about those, but just send them
here in case.
Frédéric Dalleau (2):
udevng: Detect huawei E3372 pcui
udevng: Detect huawei E3372 modem and pcui
plugins/udevng.c | 3 +++
1 file changed, 3 insertions(+)
--
2.7.4
5 years
