This list is specific to discussion of the userspace libraries and infrastructure under
development here: https://github.com/tpm2-software
. Your question seems to be unrelated to
this project unless I’m misunderstanding. You may have better luck on a list more focused
on hardware (possibly the linux device driver?).
From: tpm2 [mailto:firstname.lastname@example.org] On Behalf Of Sherry Zhang(BJ-RD)
Sent: 26 February, 2019 00:04
Subject: [tpm2] when SPI controller is DMA mode, TPM can not work
SPI port0 flash is used to boot BIOS.
SPI port1 flash is a device.
SPI port2 is connected with TPM.
I set the SPI controller is DMA mode, port0/1 flash can work well.
OS hang and reboot can not work .So I poweroff.
Does anyone know what is cause?
This email contains confidential or legally privileged information and is for the sole use
of its intended recipient. Any unauthorized review, use, copying or forwarding of this
email or the content of this email is strictly prohibited.